Hotfix Rhinestone: How to Remove It?

Hotfix rhinestones are a standard decorative option for tasks using cloth, providing a little glitz and glitter. Nevertheless, what should you do if you wish to get rid of them? Removing hotfix rhinestones from fabric may be complex, whether you’re trying to remedy a design flaw or recycle old clothing. 

But don’t worry, and you can remove these decorations without causing any damage to your fabric if you have the correct equipment and procedures. We’ll show you exactly how to remove hotfix rhinestones from fabric in this post so you may change up your patterns and be creative with your creations.

How To Remove Hotfix Rhinestones From Fabric

How To Remove Hotfix Rhinestones From Fabric

For many years, rhinestones have given garments and accessories a dash of glitz and glitter. Hotfix rhinestones are among the most popular and available in various sizes. When used on cloth, they form a robust and long-lasting bind because they are constructed with a unique adhesive that is heat triggered. 

It may occasionally be necessary to remove hotfix rhinestones from the fabric; however, doing so without causing any harm to the fabric is difficult. This article will discuss various efficient ways to take hotfix rhinestones out of cloth.

Hotfix rhinestones are a popular embellishment choice for many fabric projects, but sometimes you might want to remove them. Whether you’re looking to repurpose a garment, fix a mistake, or change the design, removing hotfix rhinestones from fabric can be challenging. Yet, you can get rid of these annoying stones without harming your fabric if you use the appropriate equipment and methods.

Tools You Will Need

  • Tweezers
  • Seam ripper
  • Heat gun
  • Iron
  • Parchment paper
  • Rubbing alcohol
  • Cotton swabs
  • Fabric glue remover
  • Goo Gone or similar adhesive remover

Step-by-Step Guide

How To Remove Hotfix Rhinestones From Fabric

Prepare the Fabric

Before you begin removing hotfix rhinestones, it’s essential to prepare the fabric. If possible, remove any loose rhinestones with a pair of tweezers. You should also examine the fabric to determine whether it can withstand the heat and pressure required to remove the rhinestones. If unsure, test a small, inconspicuous area of the fabric with the heat gun or iron to see how it reacts.

Loosen the Glue

The hotfix rhinestones are attached to the fabric with heat-activated glue. You can use a heat gun or an iron to loosen this glue. Hold a heat gun about 2 inches from the rhinestone and apply heat for 10-20 seconds. Avoid overheating the cloth since doing so might harm it. If using an iron, set it to medium heat and place a piece of parchment paper over the rhinestone. Press down on the parchment paper with the iron for 10-20 seconds.

Remove the Rhinestone

Once the glue has been loosened, you can remove the rhinestone with tweezers. Gently grasp the rhinestone and pull it off the fabric. If the rhinestone is particularly stubborn, you may need to use a seam ripper to cut the glue around the edges of the stone.

Clean the Fabric

After removing the hotfix rhinestones, you may notice some residue or adhesive on the fabric. To remove this, you can use rubbing alcohol and a cotton swab. Rub the residue with a cotton swab dipped in rubbing alcohol until it comes off the cloth.

Try Goo Gone or a fabric glue remover if the residue is tough to remove. The remover should be applied sparingly on the residue and left to sit for a little while. After that, massage a soft cloth or cotton swab until it comes off gently.

Repeat the Process

If you have multiple rhinestones to remove, repeat the above steps until all of the rhinestones are removed. To prevent damaging the cloth or overheating it, take pauses as needed.

Tips and Tricks

  • If you’re working with delicate or sensitive fabrics, such as silk or satin, it’s best to use a heat gun rather than iron, as the pressure from the iron can damage the fabric.
  • Be patient when removing hotfix rhinestones. It can be a time-consuming process, especially if you have a lot of rhinestones to remove.
  • If you’re having trouble removing a particularly stubborn rhinestone, try applying a small amount of heat directly to the stone with a heat gun or iron before attempting to remove it.
  • When attempting to remove hotfix rhinestones, always test a tiny, inconspicuous section of the fabric to be sure it can resist the heat and pressure needed.


Removing hotfix rhinestones from cloth might seem complex, but it’s achievable with the appropriate equipment and methods. By following the instructions above, you may effectively remove those bothersome stones from your fabric without causing any damage. 

A little part of the cloth should be tested before beginning, and you should be patient and take pauses as necessary. You’ll be able to remove hotfix rhinestones like a pro with the help of these tips and techniques, which will also enable you to complete more ambitious fabric projects. So go ahead, use your imagination, and don’t be scared to try different design approaches!

Leave a Comment